Swami R/C

Your BulletProof Wheeliebar solution for the Stampede, Rustler or Bandit.

What we've got here is a super-buff Wheelie bar. The product was spawned out of necessity. Once you've got enough power and traction in one of these vehicles, the frontend will be coming up at will. A wheelie bar, is simply another set of wheels, behind the rear wheels, that your truck can rest on when its front tires are pointed skyward.

Without it, your truck will go out of control when the rear-end touches the ground. Eventually this can wear right through the housing, exposing the motor to the environmental perils of R/C

The "Full Bend" is a better choice for low to medium power setups.

If you have a ripping hot setup, the Full Bend will get completely run over and the truck will flip right past it. If thats not to you're liking, choose the "Laid Back" option instead.

I did what anyone would do, I bought was was on the market. This awful thing I bought was destroyed within just a couple of days. Don't they know how we treat these trucks? I beat the snot out of mine. I needed a device that would hold up.

For example, look at this thing. You could bend its skid plate with your bare hands! The hubs on the cheap foam tires break, and the pathetic bolts easily bend.

Thats when I brought up my problem to Machine Guy Steve. Together we designed the Swami-Bar. This is completely hand made. It starts with T6 6061 1/8" Aluminum plate stock, 3/8" Aluminum round stock, massive #8 bolts, and hobby level airplane wheels. Unlike our competitors, we use a "radius bend" which is far stronger than a straight bend on the plate. There is no fulcrum point for the plate to bend over. Extreme Strength

After selling over 150 SwamiBars, we've decided to have a real shop start making them. These new SwamiBars are super, super fine looking. Every edge is machined, and there is even a machined flat spot for the axle to interface with the plate. All the strength and quality of the Original Swamibar, now married to a perfect finish.

Assembly is a simple matter of screwing together the provided plate, axle, wheels and hardware. Click here for more detailed instructions.

Check out the massive bolts that are used, compared to our competitors.

About Plastic Wheels: Some people have asked me why I don't use Aluminum hubbed Wheels. I haven't liked any I have found on the market. The ones available have a very hard rubber around the hub. So, not only are they heavy, they do not absorb energy very well. The SwamiBar protects the entire vehicle from bad landings on the rear by absorbing the energy, rather than passing it on to the skidplate and chassis.

From Cruiser:

Hey, Everyone,

Just thought I would put in a good word for our old friend Swami. After tearing up a couple of ESP wheelie bars, I decided to get one that Swami is selling. If you need a wheelie bar, the Swami-Bar is the way to go.

Swami is easy to deal with and he delivered just what he promised. The SwamiBar is WAY better than the ESP wheelie bar. It's much thicker and has model airplane wheels instead of the foam wheels that come with the ESP wheelie bar. I installed mine yesterday and it fit perfectly. I pulled wheelies all up and down the street yesterday and it hardly had a scratch.

If you need a wheelie bar, the SwamiBar is definitely the way to go.

Swami, YOU ROCK!

From Bobatk:

Just recieved my wheelie bar..Thanks bud..The quality is awesome and will last forever..Wish all manufactors were quality like this.....

From Razer:

I had several vertical jumps land on the SwamiBar wheels with no bending at all. Very well made & I would have grinded off the back of my trannys for sure without them. If you like torque & wheelies, you need a SwamiBar! If you don't like torque & wheelies, you need a Tyco.

From King:

The swamibar is also like a motor-saver. I'm sure my motors would be all beat up without it. I've landed numerous times
on the swami-bar and I alwys think what if the bar wasn't there?
Destruction to the rear would result for sure. The rubber airplane wheels are also a good bumper when landing jumps on your tail end or if the truck starts cartwheeling.

From Coleko:

Well I got my Swami Bar in the mail today and im very happy. Best thing Ive ever got for my pede besides my Brushless. I finally get to use my new body with out tearing it up in the rear. Good work very strong wheelie bar. It took some nasty cart wheels already and some nasty landings on it as well. Not a dent or bend on it. Keep up the good work on making great products for the pede. The next thing for me is to get your rear chassis brace. Thanks a lot .

From T Crusher:

I setup a plywood jump, about 3 feet high, had ALOT of running room, so I was jumping at very hairy speeds with a very hairy # of cells. A TON of times I landed on the bar, even with 12 cells, all that weight, landing fully on the SwamiBar, not a bend or tweak in sight...

An easy 10/10

The hardest test of them all, the BMX track, using 10 cells...

It held up very well to this INSANE abuse. On my 3rd pack I snapped one of my Big Bore shock shafts... I couldnt believe it... That is probably the hardest I have ever ran my truck, and the SwamiBar still stands strong...

From Tun

Just arrived today and I just tried it out - VERY NICE. The construction is amazing. I really appreciate your help and advice earlier. That aluminum is cool, way thinner than the home depot stuff I was using and lighter. Love the logo.

Going to show off to my Rustler-buddy tomorrow at work. Thx again!

Read the Misbehavin-RC Review of the SwamiBar!

This is a new product just for the Stampede. It includes a "rock deflector" that will cover and protect the wimpy plastic rear-brace.

More Pictures of the Swamibar w/ Deflector Shield

If you simply need to upgrade an existing wheeliebar - check out our wheeliebar parts where you buy only what you need.